(2) Stainless Steel European Skull Mount Hanger Deer & Hog KRENEK SKULL BRACKET

Description

Lot of (2) Stainless Steel Krenek Skull Brackets
Check out the Youtube Video at
https://www.youtube.com/watch?v=-I1ckmGfKIs
SIMPLE, SECURE, UNNOTICEABLE
The, patented, Krenek Skull Bracket was designed to be easy to use, securely hold skulls on the wall, and be unnoticeable. Made from 14 gauge Stainless Steel. The bracket features a key hole cut out that enables the user to attach a fastener to the wall, slip the bracket over it and tighten it down. The unmodified skull naturally comes to rest on 3 support tangs, totaling 1 3/4 inches of metal, to hold the skull securely in place. The skull is displayed in a natural forward facing position. Made in the U.S.A.
Krenek Skull Bracket Instructions
1. Choose a wall anchor (not included) that will support the full weight of the bracket and skull.
2. Following the wall anchor instructions attach the wall anchor to wall leaving approximately 1/8" of the anchor out from the wall on which to hang bracket.
3. Slip bracket over wall anchor, drop into slot, and tighten. The center tang must be vertical and the outside tangs must be level. Do not use in any other position.
4. Ensure the bracket, wall anchor, and wall will support the weight of the bracket and skull before continuing.
5. Lower the brain stem cavity of the skull onto the base of the center tang, so that the skull comes to rest on the outside tangs*. Ensure the skull is properly in place and that the bracket is supporting the weight of the skull before releasing it.
* If the skull does not fit the bracket, the center tang can be bent out NO MORE THAN 1 1/4" from the anchor head. The Krenek Skull Bracket is designed to fit most whitetail and similar types and sizes of skulls that are not damaged in any way. It will not work on skulls that have antlers or horns that extend beyond the back of the skull when the head is in a neutral forward facing position. If the anatomy of the skull does not allow for a proper fit DO NOT use.
All purchasers and users of the Krenek Skull Bracket assume any and all risks of using this product. Do not use for any other purpose other than hanging properly compatible skulls. Do not use if the bracket or skull is damaged in any way. If the bracket and skull are not properly installed serious injury and property damage may occur. Always use a wall and an appropriate wall anchor for that type of wall that will support the weight of the bracket and skull. Follow all instructions.
You are purchasing (2) new packaged Stainless Steel Krenek Skull Brackets only, no skulls or other items pictured.