Coralvue Hydros 5 Button Box (0-10V Input) for Control 4/Wave Engine

Description

JB Aquatics LLC designed and custom manufactured 5 Button Box (0-10V Input) for Coralvue Hydros Control 4 and/or Wave Engine.
The 5 button (momentary) push button accessory for the Coralvue Hydros Control 4 aquarium controller. Interfaces to the 6 pin 0-10V Input Port on the Control 4 or Wave Engine to allow physical control of modes and external devices. Each button produces a different unique voltage level that can be used to trigger the controller for various functions. Only 1 button can be pressed at a time, but Hydros can be configured to trigger button presses into virtual "toggle" buttons internally.
Some things you can do with this box:
Use a button to enable FEED MODE, WATER CHANGE MODE, or any other pre-defined mode on your Hydros Control 4
Use a button to toggle OFF and ON any output device such as a return pump, lights, skimmer, and more. Hydros can be programmed to toggle OFF/ON with the first push and then toggle the output ON/OFF with a second push. Or you can set a timeout for Hydros to automatically reset the output after a set time.
You can also use this box with the Hydros Wave Engine's 0-10V input port to select your preprogramed modes also!
While the box is the same style as other Coralvue Hyrdos controllers (IP65), they are not fully dust/waterproof. But the switches are stainless steel and waterproof to provide protection from wet fingers. Tabs on the box provide for easy mounting and blend in with other Hydros devices.
The box includes 2 identical GX12-6 ports on the bottom that are pinned out the same as the 0-10V port on the Control 4 or Wave Engine. The push button box uses only 1 of the 4 available 0-10V input ports, and the secondary connector allows other Hydros cables/accessories to take advantage of the unused inputs. By default the push button box is configured for Input 1.
Included with the push button box is a Female to Female GX12-6 pin cable. This cable attaches directly to your 0-10V Input Port on the Hydros Control 4 or Wave Engine. The secondary port comes with a black dust protector.
Each unit comes with:
- 1 Hydros 0-5V Push Button Box
- 1 Female to Female GX12-6 pin cable (2 meters long)
- 1 GX12 dust cap
Full instructions on how to use the Push Button Box with Hydros are included via a web link with each box. Google "
Hydros 0-5V Button Box Tutorial" for more information.
*Hydros Control 4 and Wave Engine sold separately