Neptune Systems ATK Auto Top Off Kit

Description

PLEASE NOTE THAT THE AUCTION ONLY INCLUDES
W
HAT
IS IN THE PIC ONLY!!!
Thank you for visiting our auction today we have a used Neptune Systems  ATK Auto Top Off Kit.
A Complete, Simple, & Standalone ATO!
If you want a safe ATO system, the Neptune System ATK v2 uses a mixture of optical eyes and a float valve to ensure your tanks water level stays the same while preventing overfills. With the ATK v2 you do not need an Apex Controller since it can be run 100% standalone, however with the addition of an Apex Controller additional features can be unlocked and more accessories can be added to the included FMM module.
Plug & Play Operation
Includes Powerful 24V DC PMUP
Two Optical Sensors With No Moving Parts
IQ-Fill Water Run-Time Intelligence
Mechanical Float Valve
Audible Alarms
No Apex Necessary
Advanced Featured Unlocked When Paired With Apex Controllers
The ATK (Automatic Top-off Kit) is a simple, standalone, and complete solution for replacing water lost to evaporation.
The new aquarium hobbyist has many challenges, but none is more annoying than the chore of adding water, every day, to make up for that lost to evaporation (a.k.a. topping off/up). This alone usually makes the automatic top-off (ATO) device the first piece of automation equipment purchased.
The ironic flip side of this decision is that a faulty ATO device is one of the leading reasons for catastrophic aquarium failure, or even worse, flooding of the house or business.
Not all ATO devices are created equal. Sadly, many ATO on the market are made with cheap components, have very little protection against these catastrophes, and are just a nightmare to assemble and install correctly.
An ATO does not have to be both a blessing and a curse!
Neptune Systems designed our ATK – Automatic Top-Off Kit to not only be super-simple to install and use, but it is unique in the market as an ATO device with three layers of redundant monitoring and water-level control. The ATK does the work for you, while at the same time protecting your tank and your home.
Safer Than You Can See
The Neptune Systems ATK uses the robust Fluid Metering Module with re-designed optical sensors to monitor your water level. The dual sensor design allows for the ATK to have one main water level sensor and the other as a backup should the first ever get dirty. On top of the optical sensors, a mechanical float valve is integrated into the pre-assembled water level mechanism that will protect you against the super rare electronics failure. On-top of all that, IQ-Fill technology will learn and limit the run-time limits for your aquarium system, ensuring that if all else fails, the PMUP never runs long enough to overfill your aquarium.
Two Accessory Ports Let You Expand Your ATK
The FMM module included with the ATK has four ports for sensors and probes. The two installed optical sensors for the ATK only use port-1 and port-2. This means there are two free ports that can be used for these optional purposes.
Optical Sensors with Magnetic Mounts
Whether for your ATO reservoir, to use as a sump-high alert, or for your long term water storage such as a brute container, these optical sensors plugin into the FMM. In standalone use when used in your ATO reservoir (plugged into port-4), the FMM will stop your PMUP and sound an alarm when the sensor is above the water level. If you plug it into port-3, and mount it high in your sump, if your water level ever goes that high, an alarm will sound and your PMUP will stop operating.
Optional leak detection probes.
Insert one of our leak detection probes into port-3 on the FMM and then place it near your sump. Now, if for some reason your sump should ever overflow, your ATK will stop operating and an alarm will sound.
Flow sensors in sizes from 1/4″ to 2″ (Apex-connected mode only)
Optional sensors are available that will monitor the flow through plumbing on your aquarium. This is perfect for monitoring the health of your return pump, keeping an eye on your emergency drain, setting the levels on your various reactors and filters, or watching the flow to your RODI.
What's Included?
1x FMM Fluid Monitoring Module
2x Optical Water Level Sensors
1x Float Valve
1x 90° Tube Fitting
1x PUMP
1x  Red RO Tube
For any questions feel free to contact us, we will respond as soon as possible.
We
do
not
ship
international
.
We
do
combine
shipping
as
long
as
the
items
can
be
shipped
together
without
getting
damaged
.
We
will
only
combine
shipping
for
two
weeks
.
Auction Policy
PLEASE READ BEFORE PLACING A BID OR PURCHASING ANY ITEM.
Return Policy: Returns accepted, contact us for instructions. You will receive a refund of the original purchase price and no refunds on shipping/handling charges. Please note all items are tested and described it's condition within the auction listing, so please read listing carefully before bidding.
Payment: PayPal for shipped items or cash for in person pickup. If you would like to come to pick up the item, please feel free to contact us to schedule a time and day.
Shipping: We quote shipping prices for 48 states, excluding Hawaii and Alaska. WE DO ship to Hawaii and Alaska, just contact us with City, State, and Zip Code, and we will provide you with a shipping quote. We ship all packages 3 business days, after we have received cleared payment. All packages are shipped via USPS or UPS.All package aren’t insured unless requested by the buyer. We do insure the larger items, as we do notice, packages getting damaged more with larger items compare to smaller items. Smaller items are not insured to reduce the cost of shipping to the buyer, if you would like us to insure any item, please contact us.
Feedback: This is greatly appreciated, as it helps us see how we are doing. We would like to achieve the highest rating as possible, so if there is an issue, please contact us so we can address the issue, before leaving negative feedback.
THANK FOR VISITING OUR AUCTION. WE APPRECIATE YOUR BUSINESS